DALI-2 4Ch PD

Phase dimmer with DALI input to control dimmable 230V luminaires in a DALI system. The 4 channel phase dimmer is suitable for 4x10W loads. Each channel has its own DALI address. Leading edge or trailing edge can be set with the software tool DALI Cockpit. The DALI-2 4Ch PD also supports the operating mode as a DALI controlled electronic switch. The DIN rail housing is suitable for installation in control cabinets.

DALI-2 4Ch PD

Phase dimmer with DALI input to control dimmable 230V luminaires in a DALI system. The 4 channel phase dimmer is suitable for 4x10W loads. Each channel has its own DALI address. Leading edge or trailing edge can be set with the software tool DALI Cockpit. The DALI-2 4Ch PD also supports the operating mode as a DALI controlled electronic switch. The DIN rail housing is suitable for installation in control cabinets.

Product types

Art. Nr.: 86451975-HS

DALI-2 4Ch PD – open datasheet

Add to request

Specifications

Technical Data
operational ambient temperature
-10°C … +45°C
protection degree terminals / housing
IP20 / IP40
connection wire cross section
max. 2.5mm²
mounting
DIN rail
Function
device type
4 channel phase dimmer
configurable via DALI Cockpit
yes
Electrical Data
input mains
L, N
input voltage range
230V AC
DALI control input
DA, DA
max. current consumption DALI
4mA
number of DALI addresses
4
output trailing/leading edge phase cut of mains
LS1, LS2, LS3, LS4, N
output voltage range
0 to 230VAC
phase cut angle
0°-180°
output voltage frequency
like input L,N
max. output current
0.06A Eff ac / channel
load range
10W / channel
Dimensions
length
98mm
width
17.5mm
height
56mm
colour
grey

Downloads & Links

Links

DALI-2 certification - DALI-2 4Ch PD

Downloads

Datasheet - D0126 DALI-2 4Ch PD (PDF - 844.89 kB)