DALI PS serves as power supply for the DALI bus system. Voltage and current limitation according to standard as well as timing ensure a reliable bus communication. With the output current of up to 250mA an entire DALI line can be supplied. Up to 64 addressable DALI devices and additional 20 to 30 control modules (DALI Sensors, MC, Touch panel…), up to an overall load of 200mA can be connected. Units with different output current and housing are available, suitable for DIN rail mounting, remote ceiling installation (housing with strain relief) or ush-mounted installation boxes.

This compact 1HP DIN rail module enables the independent control of up to 4 DALI lines, which equals 256 DALI operating devices.  Efficient scaling is possible with external DALI bus supplies. Via the DALI4Net  connected control devices and control gear can be configured via Ethernet with the DALI Cockpit Software. Using the Modbus TCP interface the DALI 4Net can be accessed for control and visualisation or connected to a building control system.
Further functions are: cross line control functions for sensors, real time clock, scheduler.

DALI USB is an interface module from DALI via USB to PC. This interface allows addressing and configuration of DALI installations with the use of the DALI Cockpit software. Different versions suitable for DIN rail mounting, remote ceiling installation, or with an integrated DALI bus power supply 30mA, are available.

Software for DALI system configuration and DALI line traffic monitoring.
DALI Cockpit features:
DALI system addressing, configuration of Lunatone DALI components, standard DALI operating devices, creating groups and scenes, monitoring and recording of the DALI bus communication, sending DALI commands as well as saving and loading of the entire system configuration.

Lunatone controls and HMIs show high simplicity but also flexibility: input device functions are user friendly, intuitive and can be adapted for various applications. The product assortment ranges from touch screens, touch panels, switches and sensors up to smartphone applications. All modules are multi-master compliant and can be combined arbitrarily. The configuration of the controls and HMI is possible with the DALI Cockpit software tool using the DALI USB interface. The controls are typically DALI bus powered.

DALI LED-driver – Input voltage 230VAC, output with secure isolation between mains and DALI. Output signal can be controlled via DALI or SwitchDim2.
Versions for constant current (250mA/350mA … 1050mA) and constant voltage (24V, 1A max.) are available.

DALI LED-driver for Tunable White LED – Input voltage 230VAC, output with secure isolation between mains and DALI, independent control of light level and colour temperature (DT8). As alternative to the DT8 control the device also supports the operating modes Balance&Dim, Dim2Warm and SwitchDim2 (control via 2 switch inputs without DALI). Variants for constant current 350mA / 700mA and constant voltage 24V, 1A max are available.

DALI LED-driver (CV or CC) with independent channels. Each channel has its own DALI address (DT6). As alternative to the DT6 control the device also supports several operating modes:
2 Channel device: Balance&Dim, Dim2Warm (suitable for Tunable White luminaires) and SwitchDim2 (control via 2 switch inputs without DALI).
3/4 Channel device: Colour&Dim (suitable for RGB luminaires) and SwitchDim2 (control via 2 switch inputs without DALI).

DALI LED-driver (CV or CC) with 2 channels to control Tunable White luminaires via one DALI address (DT8).
 As alternative to the DT8 control the device also supports the operating modes Balance&Dim, Dim2Warm and SwitchDim2 (control via 2 switch inputs without DALI).

DALI LED-driver (CV or CC) with 3/4 channels to control RGB or RGBW luminaires via one DALI address (DT8). As alternative to the DT8 control the device also supports the operating modes Colour&Dim and SwitchDim2 (control via 2 switch inputs without DALI).

These interfaces convert DALI signals to 1-10V control signals, thus enable the integration of operating devices with 1-10V control input into a DALI system. With the help of the switching relay the power supply of operating devices can be switched on and off. DALI device type 5 (IEC62386-206) compatible: linear or logarithmic dimming curve, 0-10V or 1-10V output range.

DALI RM8/RM16 provides a relay switch (controllable via DALI bus), which allows direct switching of permanent loads up to 2kW. Various compact designs and variations with make-contact or changeover-contact are available. The purposeful switching in voltage zero crossings, enables an increase of the device lifetime. The product range also includes versions with integrated in-rush current limitation. Power-up mode and system-failure settings can be configured using the DALI Cockpit.

Phase dimmer with DALI input to control dimmable 230V luminaires in a DALI system. Available for leading edge, trailing edge or as universal device with automatic load detection. Available as compact 25W version or as 300W version. From Firmware 3.5 onwards an additional operating mode is supported: DALI controlled switching.

With wireless DALI (wDALI) a wireless connection of control devices or luminaires to a DALI system can be established. Each wDALI unit consists of at least two parts, one of them being connected to the DALI system. The second component can be positioned anywhere within the radio range of the transmitter (approx. 20 to 50m). The system enables wireless control of DALI components using wireless switches or remote control units. It also allows integration of luminaires into a DALI system without DALI wiring. Thereby, wDALI provides an easy to install solution to extend DALI installations. Settings, such as assigning receivers and transmitters, can be configured using the DALI Cockpit PC Software. It is also possible to assign several transmitters to a single receiver.

wDALI control devices enable location independent control of DALI systems.

Wireless integration of spatially divided switchable ballasts, e.g. floor lamps and exterior luminaires, into the DALI system.

Wireless integration of DALI ballast to a DALI system. The GR transmitter, connected to the DALI line, wirelessly sends DALI commands to one or more receivers. The wDALI Receiver PS20 has got an integrated 20mA bus supply for the DALI subsystem.

Welcome to Lunatone’s product preview. Below you will find our upcoming products.
This preview offers a glimpse of what's to come, showing features and specifications.
Thank you for your interest in our upcoming releases. Welcome to Lunatone’s product preview. Below you will find our upcoming products. This preview offers a glimpse of what's to come, showing features and specifications. Thank you for your interest in our upcoming releases.